Skip to content

Resources

Insurance Glossary

Short, sourced definitions of the insurance terms California small businesses and contractors meet in certificates, client contracts, bonds and workers’ comp, each linked to a fuller Mithril1 guide where one exists.

Get a quote

How to use this glossary

These are the insurance words California small businesses and contractors meet on certificates, client contracts, bid packages and workers’ comp paperwork, explained in a few plain sentences each. Pick the group that matches the document in front of you and read down, since every group runs A to Z. Where Mithril1 has a fuller guide on a term, the definition links to it; for one-line versions, try insurance terms in plain English.

Certificates and contract wording

ACORD 25: A widely used standard form for a certificate of liability insurance. Its additional insured and waiver of subrogation boxes should be marked only when the policy really provides those terms. More: certificate of insurance guide.

Additional insured: A person or organization added to someone else’s liability policy by endorsement, so it gains protection under that policy without being the named insured. It brings no extra limits with it: the named insured and every additional insured draw on the same ones. Standard endorsements separate ongoing work from completed work, and a blanket version reaches anyone a written contract requires without listing each by name. More: additional insured endorsements explained.

Certificate holder: The party a certificate is made out to, usually the client or general contractor that asked for proof of coverage. Receiving the certificate gives that party no protection of its own; insured status comes only from an endorsement on the policy. Our certificate of insurance guide sets the two roles side by side.

Certificate of insurance (COI): A summary of a policy prepared for a third party, normally marked as issued for information only. It cannot change, widen or lengthen what the policy covers, so a client that needs additional insured status, primary and noncontributory wording or a waiver of subrogation should ask for the endorsements themselves. Ready-made wording for that request is in our COI request letter templates, and renewal dates fit in the COI expiration tracker.

Contractual liability: Liability a business takes on by signing a contract, such as a promise to indemnify a client, and coverage for it funds only the indemnity the contract actually calls for. A general liability policy generally excludes liability assumed by contract, apart from liability the business would have faced anyway and agreements the policy defines as “insured contracts”. Damages for breaking the contract itself, such as a missed deadline, typically fall outside. More: insurance requirements in client contracts.

Hold harmless (indemnity) agreement: A contract term in which one party takes on another party’s liability. Under a typical indemnity clause the vendor pays defense costs and damages when a third party sues the client, which moves the cost without erasing the client’s own liability; in insurance generally, indemnity means making up a loss so the person ends up about where they stood financially before it. For California construction contracts, Civil Code 2782 as amended in 2011 voids clauses that make a contractor answer for the other party’s sole negligence or willful misconduct and restricts clauses that push an owner’s or public agency’s active negligence onto contractors, so check your contract and current law with your agent or attorney.

Primary and noncontributory: Primary insurance is the policy that answers first when more than one covers the same loss. In a contract, the phrase means the vendor’s policy pays ahead of the client’s own insurance or self-insurance and the client’s policy is not asked to share the loss; without it, both insurers can end up splitting defense and damages. Like additional insured status, it is written into the policy by endorsement, and public contracts commonly ask for it. More: primary and noncontributory vs. waiver of subrogation.

Waiver of subrogation: Subrogation is an insurer’s right, once it has paid a claim, to recover that money from whoever was legally responsible for the loss. A waiver gives up that right against a named party, so a vendor’s workers’ comp insurer, for example, cannot turn to the client for repayment. It is added by endorsement and insurers often charge for it, which is why some buyers require it only on higher-risk contracts. More: waiver of subrogation explained.

Limits, deductibles and retentions

Aggregate limit: The ceiling on what a policy pays for all covered losses in one policy period combined. When general liability claims use up the annual aggregate, that policy pays nothing more until the period ends, and products and completed operations claims draw on a separate aggregate of their own. More: per occurrence and aggregate limits explained.

Deductible: The share of a covered loss the insured pays before the insurer does. A higher deductible generally brings a lower premium, but it should never exceed what the business could cover from its own funds. On a liability policy the insurer usually pays the claim from the first dollar and then bills the insured for the deductible.

Per-occurrence limit: The most a policy pays for any single occurrence. A general liability policy sets separate limits for its parts, such as products and completed operations, personal and advertising injury, and medical payments, while a business auto policy often uses one combined limit for bodily injury and property damage per occurrence. Our limits guide shows how the occurrence and aggregate numbers work together.

Per-project aggregate: An aggregate that applies to one project or location rather than the whole policy period, so claims on one job do not drain the limit available for others. Public contracts sometimes require it, and it takes an endorsement on the policy, so raise it with Mithril1 before the contract is signed. More: aggregate limits explained.

Self-insured retention (SIR): The part of a loss the policyholder keeps for itself. Unlike a deductible, the insurer generally stays out of a loss below the SIR, so the insured pays both the claim and its defense until the retention is used up; that is why an SIR belongs on a certificate when a deductible usually does not. Umbrella policies commonly apply one where no underlying policy responds, as our umbrella vs. excess liability guide shows.

Occurrence, claims-made and reporting time

Claims-made policy: A liability policy that answers claims made during the policy period, including claims for earlier acts that fall after its retroactive date. Professional liability is commonly written this way, and because claims tend to surface after a job ends, buyers often require the professional to keep coverage in force for a set time after the work is done. More: occurrence vs. claims-made policies.

Extended reporting period (tail): Extra time after a claims-made policy ends to report claims for incidents from the covered period, also called run-off coverage. The automatic window is usually short and a longer tail costs added premium, so when a claims-made policy ends, compare buying a tail with buying prior-acts coverage from the next insurer. In California, an LLC contractor that dissolves must keep or buy an extended reporting period of at least three years when one is reasonably available (Business and Professions Code 7071.19).

Occurrence policy: A liability policy that responds to incidents during the policy period, however long afterward the claim is filed. On a standard occurrence general liability form, both the accident and the injury or damage it causes must fall within that period. Our occurrence and claims-made guide compares the two triggers.

Retroactive date: The date on a claims-made policy before which incidents are not covered; injuries after it can be covered even when reported later. Claims the insured already knew about when the policy began are left out, and public contracts often require the retroactive date to fall no later than the start of the work. More: how claims-made coverage handles timing.

Liability, auto and business policies

Business owner’s policy (BOP): A package for small businesses that combines property, general liability and business interruption coverage. Strict underwriting rules, such as a maximum square footage, decide who qualifies, which makes it a fit for small main-street businesses. Vehicles need a commercial auto policy and workers’ comp is bought on its own. More: business owner’s policy.

Commercial auto (business auto policy): Covers liability from vehicles used in the business, with optional physical damage cover for the vehicles themselves. Depending on what is bought for each scheduled vehicle, it can reach owned, hired and non-owned autos, which matters because a BOP leaves vehicles out entirely. More: commercial auto insurance.

Completed operations: Liability coverage for injury or damage caused by work after it is finished, away from the insured’s premises. The date of the injury decides which policy responds, not the date of the work, so coverage has to still be in force when a problem appears; contracts often ask for it, plus additional insured status on finished work, for years after completion, in some contracts as long as ten. The additional insured guide covers the ongoing and finished-work versions.

Employment practices liability (EPLI): Coverage for an employer against claims by current or former employees over matters such as wrongful termination, discrimination or harassment. Our employment practices liability page walks through the claims it answers.

Excess liability: Coverage that pays covered losses above an underlying policy’s limit. The usual line: excess sits on top of the general liability limit, while an umbrella sits over auto and general liability and may also pick up some exposures they leave uncovered. More: umbrella vs. excess liability.

General liability (CGL): The standard business policy for bodily injury and property damage to others, plus certain personal and advertising injury, built from premises and operations, products and completed operations coverage. It does not pay to fix the business’s own work or product, and it excludes workers’ comp, auto and most pollution claims. California does not legally require it of most contractors, though the CSLB strongly recommends it and home improvement contractors must tell homeowners in writing whether they carry it; more on general liability.

Hired and non-owned auto (HNOA): Liability coverage for vehicles the business does not own: hired means rented, leased or borrowed, and non-owned usually means employees’ own cars used on business errands. It typically applies above the employee’s personal auto coverage, and public contracts often ask for auto liability that includes owned, hired and non-owned vehicles. More: hired and non-owned auto explained.

Professional liability / errors and omissions (E&O): Covers professionals for errors, omissions or negligent acts in the services they deliver. It is usually written claims-made, so the retroactive date and any tail matter, and public buyers commonly require it from consultants. More: professional liability insurance.

Umbrella: Coverage that adds limits above underlying liability policies such as auto, general liability and employers liability. It can also fill some gaps those policies leave, within the limits of its own exclusions and retention. More: commercial umbrella insurance.

Workers’ comp in California

Certificate of consent to self-insure: The approval an employer needs from the Department of Industrial Relations’ Office of Self-Insurance Plans to carry its own workers’ comp, with private employers posting security as a condition. Small employers in one industry can pool their liabilities through group self-insurance instead, and the CSLB accepts a DIR self-insurance certificate in place of a workers’ comp policy certificate. More: California workers’ comp basics for employers.

Class code: A code that groups occupations or industries for workers’ comp rating. In California the Workers’ Compensation Insurance Rating Bureau (WCIRB) develops and assigns the codes, the Insurance Commissioner approves them, and the right one follows the duties employees actually perform. When insured contractors file with the CSLB, they list up to three codes carrying the most estimated payroll. More: California workers’ comp class codes and class codes by business type.

Employers liability: The second part of a workers’ comp policy, answering employee injury claims that fall outside the workers’ comp benefit system, for example certain suits brought by a worker’s spouse or by third parties. Umbrella policies are commonly built to sit above it. More: how the two parts of a workers’ comp policy fit together.

Experience modification (x-mod): A factor the WCIRB calculates for each qualifying California employer from the payroll and loss data insurers report to it every year. It measures the employer’s claims history against similar-size employers in the same industry, where a mod under 100 generally means better than average and one over 100 worse, and it is applied to the base premium along with other rating plans. The WCIRB’s policyholder ombudsman takes questions about mods, classifications and rating; more in experience modifier (x-mod) explained.

Premium audit: The check after a workers’ comp policy term ends, when the insurer reviews actual payroll and sets the final premium. If payroll ran higher than the estimate, the employer owes more; if it ran lower, money comes back. Our class codes guide explains how payroll is reported by class for the audit.

Workers’ compensation: Pays benefits for employees’ work-related injuries and illnesses, including medical care, disability, death and rehabilitation benefits, with no need to prove fault. Under Labor Code 3700, a California employer with one or more employees must provide it through a licensed insurer, the State Compensation Insurance Fund or approved self-insurance, and going unlawfully uninsured is a misdemeanor that can bring a stop order and state penalties. For contractors, the CSLB needs a policy certificate, self-insurance certificate or no-employee exemption on file, requires C-8, C-20, C-22, C-39 and D-49 licensees to carry coverage even with no employees, and suspends a license when coverage lapses; see workers’ compensation insurance.

Bonds and construction projects

Bid bond: Assures a project owner that a winning bidder will sign the contract and supply the performance bond it requires. California counties accept a bidder’s bond from an admitted surety as one form of bid security on public construction. More: contractor and surety bonds.

Builders risk: Property coverage for a building under construction, or an existing one being added to, altered or repaired, including the materials and equipment going into the work. It can be written so the insured value rises as the project progresses, and a contract can require it at full completed value, covering work on site, at temporary off-site locations and in transit. More: builders risk insurance.

Contractor’s license bond: The $25,000 bond California contractors need to get, reactivate, renew or keep an active license, according to the CSLB. It is there for consumers harmed by defective construction or license-law violations and for employees owed unpaid wages. A separate $25,000 bond of qualifying individual is also required when a responsible managing employee (RME) is the qualifier, or a responsible managing officer (RMO) owns under 10% of the voting stock; see California’s contractor bonds.

Inland marine: Despite the name, property coverage for business property moving over land and for other people’s property in your care while it travels; boats belong to ocean marine. Contractors’ equipment floaters and installation floaters are common forms, so ask about one for tools and equipment that go from job to job. More: inland marine insurance explained and tools and equipment insurance.

OCIP / CCIP (wrap-up): A single insurance program set up for one project to cover the contractors and subcontractors working on it, in place of each firm buying its own. In an OCIP the owner starts and runs the program; in a CCIP the contractor does. California’s 2011 limits on subcontractor indemnity in Civil Code 2782.05 do not apply to wrap-ups, and enrolled firms should read the project’s insurance manual for any coverage they still carry themselves.

Payment bond: Guarantees that subcontractors and suppliers on a project get paid. Under California Civil Code 9550, a direct contractor on a public works contract over $25,000 must give one, from an admitted surety insurer, before work starts. More: bid, performance and payment bonds.

Performance bond: Guarantees that the contract work gets completed, and is also known as a contract bond. California counties require the winning bidder on certain public construction contracts to furnish a faithful-performance bond. More: how contract bonds work.

Surety bond: A three-party guarantee in which a surety, usually an insurance company, answers to the obligee (the project owner) if the principal (the contractor) fails to perform. The U.S. Small Business Administration describes it as assurance to the customer that the work gets done, and it guarantees bonds that authorized sureties issue to small businesses that might not otherwise qualify. More: contractor and surety bonds.

Policy paperwork

Binder: A short-term agreement that gives temporary coverage until the policy itself is issued or delivered. It carries a business through the gap between agreeing to coverage and receiving the finished policy.

Declarations page: Usually the first page of a policy, listing the insurer, policy number, effective and expiration dates, premium, coverages and deductibles. It is the quickest place to confirm what was bought before reading the rest of the form.

Endorsement: A written change to a policy that adds or removes coverage, sometimes called a rider, and its wording takes precedence over the general policy terms. Additional insured status, primary and noncontributory wording, waivers of subrogation and per-project aggregates all arrive this way; the additional insured endorsements guide walks through the most requested one.

Exclusion: A provision that denies or restricts coverage for certain perils, persons, property or locations. The California Department of Insurance urges reading them closely, especially in a liability policy, and asking your broker about any that are unclear; Mithril1 will go through yours with you.

Named insured: The person or organization the policy identifies as the insured. The named insured and every additional insured on the policy share the same limits.

Policy period: The span of time coverage is in effect, from the effective date to the expiration date. An occurrence policy looks at when the incident happens within it, while a claims-made policy looks at when the claim is made.

Get help with the terms in your contract

Holding a certificate request, bid package or contract insurance section full of these terms? Send it to Mithril1 and we will go through what each requirement asks of your policies before you sign.

A few useful answers

Common questions

What is the difference between a certificate holder and an additional insured?

The certificate holder is simply the party the certificate is made out to, usually the client or general contractor that asked for proof. An additional insured has been added to the policy by endorsement and can claim protection under it, sharing the named insured’s limits. Appearing as the holder never brings that status by itself.

Can a certificate of insurance add coverage to a policy?

No. A certificate summarizes a policy for someone else and cannot change, widen or lengthen what that policy covers. Additional insured status, primary and noncontributory wording and a waiver of subrogation come only from endorsements, so ask for copies of those along with the certificate.

What does a waiver of subrogation change?

Normally an insurer that pays a claim can try to recover the money from whoever caused the loss. With a waiver in favor of a named party, the insurer gives up that recovery against that party, so a client is not pursued by its vendor’s insurer, such as the vendor’s workers’ comp carrier, after a covered loss.

How is a self-insured retention different from a deductible?

With a liability deductible, the insurer typically pays a covered claim in full and later bills the insured for the deductible amount. With a self-insured retention, the insured pays the claim and its defense until the retention is used up, and only then does the insurer step in.

Do California contractors have to carry general liability?

Most are not required to by law, but the CSLB strongly recommends it, and home improvement contractors must tell homeowners in writing whether they carry it. Workers’ comp is different: the CSLB needs proof of it, a self-insurance certificate or a no-employee exemption on file, and some trades must carry it even with no employees.