Skip to content

Resources

Contractor Insurance Requirements by Trade

What California’s licensing law asks every contractor to carry, what public buyers ask for by type of work, the endorsements their documents name, and the bonds that come with public works. Each rule cites its source, read in November 2026, and a free checklist lets you test a contract line by line.

Get a quote

Printable checklist

Download the PDF

What sets a contractor’s insurance requirements

Two sources set them. California’s licensing law sets a short list for every licensee: a $25,000 contractor’s bond, workers’ comp proof or an exemption on file with CSLB, and liability insurance for LLCs. Everything else, general liability limits included, comes from the contract, and the hiring client writes it to fit the work.

General liability shows the split clearly. CSLB’s handout on commercial general liability says the law does not require it, though the board strongly recommends it, and home improvement contractors must tell the homeowner in writing, with the bid and the contract, whether they carry it, along with the insurer’s name and phone number if they do. Each public buyer document on this page asks for it, so the contract is where it becomes a condition of the job.

What CSLB requires of every license

The license itself carries a few fixed items. Bonds are the same for every trade; workers’ comp is where the trades differ.

ItemWho needs itAmount or rule
Contractor’s bondEvery active license; none while a license is inactive$25,000
Bond of qualifying individualA license qualified by a Responsible Managing Employee, or by an officer holding under 10% of the voting stock$25,000; an officer at 10% or more files an exemption instead
Workers’ comp on fileEvery active licenseA workers’ comp certificate or DIR self-insurance certification; a licensee with no employees can file an exemption, except in the five classes below
LLC liability insuranceLLC licensesAt least $1,000,000 aggregate with five or fewer people of record, more for each person above five, up to $5,000,000
LLC employee/worker bondActive LLC licenses$100,000, on top of the contractor’s bond
Disciplinary bondReinstating or reissuing a revoked licenseSet by the Registrar, at least $25,000

Sources: CSLB bond requirements, CSLB licenses for limited liability companies and Business and Professions Code 7071.6 and 7071.19. An LLC’s policy can be written on a claims-made or occurrence form, and if its limit is not reinstated by the start of the next designated period the license is suspended until it complies. CSLB can post the insurer, policy numbers and limits on the license record.

How these bonds work, and who can claim on them, is covered on contractor and surety bonds. Whether an LLC changes your coverage at all is the subject of do you need an LLC to get business insurance.

Trades that need workers’ comp with no employees

Five license classes cannot use the no-employee exemption: C-8 Concrete, C-20 Warm-Air Heating, Ventilating and Air-Conditioning, C-22 Asbestos Abatement, C-39 Roofing and D-49 Tree Service. A contractor holding one of them files a workers’ comp certificate or self-insurance certification even as a one-person business.

On a license with several classes, missing proof does not suspend the whole license. CSLB removes the C-39 class (a rule dating to 2013) or the C-8, C-20, C-22 or D-49 class (a rule from July 1, 2023) instead. On any license, coverage has to be continuous: CSLB’s workers’ comp page says a lapse suspends the license, and work done while it is suspended counts as unlicensed. Insurers report the policy number and its start, lapse and cancellation dates to the board.

Starting January 1, 2028, under current law, the exemption ends for ordinary licensees. SB 1455 (2024) rewrote Business and Professions Code 7125 so that every active license must have a certificate or self-insurance certification on file; the one exemption kept is for a joint-venture license with no employees. CSLB’s workers’ comp page did not mention the 2028 change when we read it, and a later bill could still alter it.

Public works add a step. Before starting work, every contractor that wins a public works contract signs a certification under Labor Code 1861 that it knows the duty to insure or self-insure for workers’ comp and will comply. The policy itself is explained in California workers’ comp basics for employers, with trade notes on HVAC contractors and tree service businesses.

What public buyers ask for, by type of work

Public agencies publish their insurance terms by kind of work, and the pattern holds across them: $1 million per occurrence and $2 million aggregate general liability for routine trades, higher limits and pollution cover for environmental work, and professional liability for design work. Each document governs only that agency’s contracts, and the contract text always controls.

The County of Sonoma’s insurance templates sort work into types, which makes them a handy map:

Type of work (Sonoma template)General liabilityAutoAdded coverage
Repair and maintenance with no pollution exposure (Template 7): janitorial, plumbing, electrical, repairs, landscaping, painting$1M occurrence / $2M aggregate / $2M products-completed operations, aggregate per project$1M combined single limitWorkers’ comp with $1M / $1M / $1M employer’s liability once anyone is hired
The same trades with pollution exposure (Template 18)As Template 7As Template 7Contractors pollution liability of $1M per incident / $2M aggregate, covering cleanup and pollutants such as asbestos, lead and mold
Environmental contractors handling hazardous materials (Template 10)$2M / $4M / $4M$2M combined single limit, with an MCS-90 where the Motor Carrier Act applies and the CA 99 48 pollution endorsementContractors pollution of $2M / $4M, including cleanup, natural resource damage and defense; $1M employer’s liability
Professional, consulting and technology services (Template 5), engineers, architects and surveyors included$1M / $2M / $2M$1M, or $300K if vehicle use is incidentalProfessional liability of $1M per claim / $2M aggregate; cyber of $2M when the vendor handles personal or County data
Auto repair, towing and storage (Template 20)$1M / $2M / $2M$1MGaragekeepers of $50K per vehicle / $100K per location when customer vehicles sit at the vendor’s site; a $1M / $2M garage policy can replace all three

That map fits electricians, plumbers, painters, landscapers and cleaning businesses on Template 7, while engineers and architects fall under Template 5 and tow operators under Template 20.

Construction and public works go by project value under Sonoma’s Template 2:

Project valueGeneral liability (occurrence / aggregate / products-completed ops)Auto
Under $1M$1M / $2M / $2M$1M
$1M to $4.99M$2M / $4M / $4M$2M
$5M to $9.99M$5M$2M
$10M and over$10M$2M

The same template adds pollution cover ($1M / $1M under $5 million, $2M / $2M at $5 million and over, and it can be dropped for low-risk projects), $1M professional liability when the contractor does its own design, and completed-operations coverage that runs one, two, three or five years past the guarantee period by value tier. Framing, mechanical and electrical subcontractors carry $1M / $2M / $2M under $1 million and $2M / $4M / $4M above it; other subcontractors carry $1M / $2M / $2M. Sonoma asks contractors to contact Risk Management first for dams, piers, roads and bridges, wastewater work, work near water and projects over $2 million.

Caltrans sets construction limits by the size of the total bid, not by trade (Standard Specifications 7-1.06D(2)). The first two tiers read:

Total bidEach occurrenceProducts-completed ops aggregateGeneral aggregateUmbrella or excess
Up to $1M$1M$2M$2M$5M
Over $1M, up to $10M$1M$2M$2M$10M

Larger bids step up again, so read the higher tiers in the Caltrans document itself. The umbrella sits on top of the general liability limits and drops down if they are impaired, and small-business subcontractors need to carry no more than the table shows, with the subcontract amount read as the total bid. Caltrans also asks for insurers rated A.M. Best A- or better in Financial Size Category VII or better, general liability that does not exclude explosion, collapse and underground hazards, a copy of the full liability and excess policies from the apparent low bidder, and a CPA declaration when the self-insured retention exceeds $50,000.

Environmental work carries the longest tails. Stanislaus County’s requirements for environmental contractors (2025.1) call for $2M per occurrence general liability, $1M auto with transportation pollution liability for materials hauled, and pollution coverage of $2M per claim and aggregate. On lead and asbestos work the pollution policy cannot exclude lead-based paint or asbestos, on mold work it cannot exclude mold, and general liability, E&O and pollution stay in force at least five years after completion. Our contractors pollution liability page explains that coverage.

Long Beach’s Administrative Regulation 8-27 (revised March 2024) lists requirements by activity in its Table A:

Activity in Table AWhat it lists
Construction contractsGeneral liability with explosion, collapse and underground (XCU) cover and additional insured, auto, workers’ comp and builders risk; jobs over $1M or with special risks go to Risk Management
DemolitionGeneral liability with XCU and additional insured, auto and workers’ comp; work over three floors, with explosives or with known hazardous substances goes to Risk Management
Asbestos abatementDedicated asbestos abatement liability for current and future claims, with the aggregate per location
Lead paint abatementGeneral liability with additional insured, plus lead paint abatement liability
Hazardous materials transportationGeneral liability of $2M / $4M with pollution at full limits, auto including pollution, and workers’ comp
Elevator maintenanceGeneral liability with additional insured, auto and workers’ comp
Engineering, architecture, surveying, landscape architecture, environmental consultingGeneral liability with additional insured, professional liability, auto and workers’ comp
Tow operationsAuto with on-hook liability, and workers’ comp

Its basic limits are $1M per occurrence and $2M aggregate general liability, $1M auto for most contractors, statutory workers’ comp with $1M employer’s liability, and $1M professional liability per claim. Table A has no row for janitorial, roofing, painting or security work, so those contracts follow the terms written into them.

For state contracts, the Department of General Services sample clauses ask for occurrence-form general liability at $1M / $2M, $1M auto covering owned, hired and non-owned vehicles, statutory comp with $1M employer’s liability, and a waiver of subrogation endorsement in favor of the State. A solicitation can add builder’s risk, commercial property, crime, cyber, pollution or professional liability, and DGS tells bidders to send the insurance section to their agent before bidding.

Endorsements the buyer documents name

Nearly every document above asks for the same set: additional insured for ongoing and completed operations, primary and non-contributory wording, and a waiver of subrogation. Several also want copies of the endorsements themselves, because a certificate alone does not prove them.

  • Additional insured: DGS (general liability and auto), Caltrans (named on the liability endorsement), every Sonoma template, Stanislaus (CG 20 10 with CG 20 37 or equivalent) and Long Beach.
  • Completed operations period: one year after completion on Sonoma’s trade templates, one to five years by value on its construction template, and at least five years for Stanislaus environmental work.
  • Primary and non-contributory: required on Sonoma’s construction, professional and environmental templates and by Stanislaus (CG 20 01 04 13, extended to the umbrella); on Sonoma’s trade and auto templates, only for Marinas and Airport contracts.
  • Waiver of subrogation: DGS on workers’ comp; Sonoma on comp and general liability across its trade and construction templates; Stanislaus on comp.
  • Endorsement copies: DGS, Sonoma’s construction template and its pollution-exposure trade template.

What each form does is explained in additional insured endorsements explained and primary and noncontributory vs. waiver of subrogation.

Bonds and builders risk on public works

On California public works over $25,000, the direct contractor gives a payment bond for at least the full contract amount before work starts. Bid security and performance bonds follow the bid documents, and builders risk comes from the contract rather than a statute.

  • Local agencies: Civil Code 9550 requires the payment bond on public works contracts over $25,000, and the call for bids must say so; design professionals are exempt.
  • State entities: Public Contract Code 7103 sets the same full-contract-amount payment bond over $25,000. Architects, engineers and land surveyors are exempt, and the Legislature, the courts and the University of California fall outside “state entity”.
  • Bond form: Civil Code 9554 calls for a bond, not a deposit, from an admitted surety insurer, and a prime contractor can require its subcontractors to bond back to it.
  • Counties: under Public Contract Code 20129, construction bids come with cash, a cashier’s or certified check, or a bidder’s bond from an admitted surety; the winning bidder signs a faithful-performance bond the board approves, and other bidders get their security back within 60 days after the contract is let.
  • School districts: Public Contract Code 20111 asks for bidder’s security, in the same four forms, on projects above dollar thresholds that are adjusted every year, so take the current figure from the bid documents.
  • Percentages: the bid security and performance bond amounts are the ones the bid documents set.

Builders risk is a contract term. DGS lists it as a line a solicitation can add, Sonoma provides it on its own projects or has the contractor carry it at the full completed value on higher-risk jobs, and Long Beach requires all-risk builders risk at full replacement cost, excluding earthquake and flood, on construction contracts. Builders risk insurance explains the policy.

Download the checklist

Download the checklist from the bar on this page to test a contract against these sources. It follows the blocks above: license items, the coverage and limits the contract asks for, endorsements, trade add-ons and public works. Fill in each limit from the contract’s insurance section, then tick a line once the certificate and endorsements confirm it.

Gathering details for a quote instead? The contractor insurance checklist covers the work, vehicles and crew, and insurance for contractors walks through the policies themselves.

Get help

Bidding a job with a long insurance section? Send it to Mithril1 with your license classes and start date, and we will request the coverage and endorsements it lists from insurers, who decide once they review your business. Contact Mithril1 with the bid documents in hand.

A few useful answers

Common questions

Is general liability insurance required for California contractors?

Not by state law for most licensees. CSLB strongly recommends it, home improvement contractors must say in writing whether they carry it, and LLC licensees must hold liability insurance of at least $1 million. Every public buyer document on this page asks for it, so plan on it before you bid.

Which California contractors need workers’ comp with no employees?

Holders of the C-8 Concrete, C-20 HVAC, C-22 Asbestos Abatement, C-39 Roofing and D-49 Tree Service classes. Other licensees with no employees can file an exemption with CSLB until January 1, 2028, when current law requires a certificate or self-insurance certification on nearly every active license.

What general liability limits do public buyers ask contractors for?

For routine trade and service work, $1 million per occurrence and $2 million aggregate is the figure DGS, Sonoma County and Long Beach publish. Environmental work and larger construction jobs move to $2 million per occurrence or more, and Caltrans adds an umbrella layer sized to the bid.

When does a California public works job need a payment bond?

When the contract is over $25,000. The direct contractor files a payment bond for at least the full contract amount, from an admitted surety, before work starts: under Civil Code 9550 for local agencies and Public Contract Code 7103 for state entities.

Is builders risk insurance required by law in California?

Not by statute. The contract sets it: Long Beach requires it on construction contracts, Sonoma provides it or has the contractor carry it on higher-risk jobs, and DGS lists it as a line a solicitation can add.

How is this checklist different from the contractor insurance checklist?

This one tests a contract’s license, coverage, endorsement and bond items line by line. The contractor insurance checklist gathers your work, vehicle and crew details for a quote. Use both before a bid.