Contractor Insurance Cost: $1 Million
A general contractor, a painter and a plumber can all ask for the same $1,000,000 contractor insurance limit and get very different bills. This guide shows what published 2026 data says contractor liability insurance costs by trade, what pushes your number up or down, and which costs sit outside the liability policy altogether.
What $1,000,000 contractor liability insurance costs
Published 2026 data from a national small-business insurance marketplace, drawn from more than 25,000 contractor policies, puts a typical general liability premium for contractors at about $83 a month, or $990 a year. Those buyers are mostly small outfits: owner-operators and crews of a few people carrying the common $1,000,000 per occurrence and $2,000,000 aggregate limits.
Trade changes the picture quickly. In the same data, electricians sit near $61 a month, painters near $72, plumbers near $147 and general contractors near $162. Another online insurer’s 2026 figures put general contractors closer to $82 a month and electricians near $36. Your own premium can land anywhere in that band, depending on your trade, payroll and claims history.
For the same limit outside construction, see how much $1 million general liability insurance costs across other kinds of business.
Why a general contractor pays more than a subcontractor
A specialty subcontractor is mostly rated on its own hands-on work. A general contractor answers for the whole job: the site, the schedule, the trades it hires and the finished building. That wider responsibility is a large part of why general contractors land near the top of the published figures above, well beyond a painting contractor working alone.
Subcontractors feel the $1,000,000 figure from the other side. A $1,000,000 per occurrence limit is the standard minimum written into commercial contracts and leases, so a sub bidding for work under a general contractor is usually asked to show that limit on a certificate, often with the general contractor and owner added as additional insureds. A lower limit can cost less, yet a policy below the contract minimum will not satisfy the contract.
For general contractors, the paperwork runs both ways. Collecting a current certificate from every sub before work starts tells your own insurer that the trades on site carry their own cover, which is one of the questions underwriters ask when pricing a builder.
How payroll and revenue scale a contractor liability premium
Insurers rate contractor general liability on a measure of size, usually payroll or annual revenue, multiplied by a rate set for the trade. A crew that doubles its payroll roughly doubles the exposure the insurer is pricing, even if the work stays the same. Many contractor policies are adjusted after the year ends, when the actual payroll or sales replace the estimate you started with.
The liability policy is rarely the whole bill. The same 2026 marketplace data for small general contractors lists general liability at $1,950 a year, workers’ compensation at $2,348, a business owner’s policy at $1,503 and commercial auto at $3,444, each a typical figure for that line on its own. At those typical figures, a small general contractor buying only liability and workers’ comp would pay $1,950 + $2,348 = $4,298 a year. Add a work truck on commercial auto and the total reaches $4,298 + $3,444 = $7,742 a year, before any umbrella, tools cover or bonds.
Established builders with several crews, larger projects and many subcontractors commonly pay well above these small-firm figures, because every one of those inputs grows the exposure.
Why your contractor insurance cost runs higher or lower
Expect a higher premium when:
- the trade is a heavier one, with roofing, electrical and plumbing work rated among the highest risk;
- payroll or revenue is larger, or growing fast;
- you hire subcontractors who cannot show current certificates;
- you have had liability claims in recent years;
- you need limits above $1,000,000, or many additional insured endorsements;
- the business is new, with little track record in the trade.
Expect a lower one when the work is lighter, crews are small, subcontractors carry their own cover, the claims record is clean and you choose a higher deductible you can comfortably pay. Several years of steady work in one trade also gives an underwriter more to go on. Our plumbers page shows how one higher-cost trade looks at these factors in practice.
Workers’ comp and the CSLB bond are separate costs
General liability pays for injury to other people and damage to their property. It does not pay your own employees’ injuries, which belong to workers’ compensation. The Contractors State License Board asks every licensed contractor to file proof of workers’ comp coverage or a signed exemption certifying the business has no employees. Some classifications must carry it whether or not they have employees: C-8 concrete, C-20 HVAC, C-22 asbestos abatement, C-39 roofing and D-49 tree service.
The CSLB also requires a $25,000 contractor license bond. That bond is a license requirement, not insurance. It protects consumers harmed by license-law violations and employees owed unpaid wages, and it does not pay the contractor’s own job-site injury or property damage claims. Our contractor and surety bonds page explains how bonds and policies sit side by side. Neither the bond nor workers’ comp counts toward the $1,000,000 liability limit a client, general contractor or lease asks to see.
What a contractor needs ready for a quote
A clean submission gets quotes back faster and closer to the real number. Have these ready:
- your CSLB license classification and a plain description of the work you do, including any work you no longer do;
- last year’s payroll and revenue, and a sober estimate for the coming year;
- what share of the work you sub out, and whether those subs carry their own insurance;
- your recent claims history, or a note that there were none;
- the insurance page from any contract or bid you are chasing, showing the limits and endorsements it asks for.
Send those to us and we request quotes from insurers that write your trade. Each insurer decides on terms after reviewing the file, and we walk you through what each quote covers, from general liability to the full contractor program.
A few useful answers
Common questions
How much does $1,000,000 contractor insurance cost per month?
Published 2026 data from a national marketplace puts typical small-contractor general liability near $83 a month at $1,000,000 per occurrence, with electricians near $61 and general contractors near $162. Your trade, payroll and claims record set where you land, and those figures cover liability only.
Is a $1 million liability policy enough for a contractor?
For many small trades it meets what clients and general contractors ask for, since $1,000,000 per occurrence is the usual contract minimum. Larger commercial or public jobs often ask for more, which is usually met with a $2,000,000 per occurrence policy or an umbrella above the liability policy.
Does contractor liability insurance include workers’ comp?
It does not. General liability covers injury and damage to others, while workers’ compensation covers your own employees. California contractors file proof of workers’ comp or an exemption with the CSLB, and a few classifications, including roofing and concrete, must carry it even with no employees.
Why do subcontractors need their own $1 million policy?
General contractors write the limit into their subcontracts so each trade answers for its own work. A sub without its own policy can push its claims onto the general contractor’s insurer, which is why the certificate is usually collected before the first day on site.
Can a new contractor get general liability through Mithril1?
It can, when an insurer accepts a new contractor’s description of the work, payroll estimate and prior experience in the trade. We send that file to insurers that write contractors, and each one decides on terms after reviewing it.
